Description
Description: Head Up Display is designed for preventing accident, which can project important information ( e.g. vehicle speed ) onto the front windshield at the eye level of the driver. Besides, the display location and brightness can be adjusted through automatic induction, which can prevent the driver from looking down at the instrument panel and shorten the time of eyes for the blind spot in front. This can avoid breaking rules and regulations due to speeding in many speed-limited sections. What’s more important, it can enable the driver to read the number instantly without shifting horizon, which is of vital value in reducing traffic accidents caused by absent-mind due to looking down.
Feature: 1. Automatic adaptation car models, and can apply for cars in line with OBD II or EUOBD (onboard automatic diagnostic system).Plug and Play.
2. 3” screen and high-definition display
3. Multi-color design makes the screen more abundant and easier to read
4. The use of nano-technology to eliminate unwanted reflections and can make display information more sharper.
5. Display rich content: speed, engine speed, water temperature, battery voltage, fuel consumption,low voltage alarm, high temperature alarm, speed alarm,free switching between kilometer and mile,free switching between C and F degree.
6. Auto power on and off with vehicle started and shutdown, effective protection of the car battery; while retaining the manual switch mode, and more easy to control HUD.
7. Automatic and manual brightness adjustment mode, driving without sunshine.
8. OBD cable:180cm Attention: OBD2 Devices Are Not Compatible With: 1. European / American cars manufacture before 2004 and Asian cars manufactured before 2007. 2. American cars manufacture for Dorge / jeep, and all cars before 2004; 3. France cars manufacture for FAT / DS / PEUGEOT / Citroen / Renault and so on. 4. Japanese cars manufacture for SUZUKI / MAZDA, and all cars before 2008. 5. Korean cars manufacture for KIA / Hyundai some models. * for Hyundai Sonata 2011 2013 2015 / Hyundai i20 2013 / Hyundai elantra 2011 2013 2014 2016 2017 / Hyundai IX3 2013 / Hyundai Tucson 2010 2017 / Hyundai MISTRA 2016 2017 / Hyundai VERNA/Accent 2013 2014, *for Kia Soul PS 2017 / KIA Sportage,Sportage R, Sportage R GLS 2011 2015 / KIA K4 2014 / KIA RIO 2009 2010 / KIA Cerato 2009 2010 / KIA K3X 2012 / KIA K5 2014 2017 6. All cars from Italy manufacture. 7. Oil and electricity mixing, diesel powered car, Pick up, SUV, ORV. 8. Below special cars: *for Nissan Rouge 2014 / Nissan Frontier 2012 / Nissan sunny n17 model 2012 / Nissan note 2006 / Nissan Livina 2008 / Nissan Murano 2007 / Nissan G11 2009 / Nissan Altima 2005 *for Honda HRV 2016 / Honda CRV 2016 / Honda jazz 2010 / Honda jazz 2014 / Honda CR-V 2008 / Honda V6 2010 / Honda Element 2010 *for Toyota Altis 2016 / Toyota Fortuner 2014 / Toyota Hilux Vigo 2015 / Toyota Porte 2009 / Toyota Camry XLE Hybrid 2016 *for Mitsubishi Outlander 2016 *for Ford Galaxy 2005 / Ford Taurus 2003 *for BMW X5 Diesel 2013 *for Chrysler Town and Country 2007 *for Lincoln Towncar 2003 *for Renault Clio 2 Phase *for Volvo XC60 2005 *for Pontiac Grand Prix 2006 / Pontiac Bonneville 2005 *for Hyundai Sonata 2013 / Hyundai Sonata 2013 / Hyundai i20 2012 / Hyundai Santa Fe 2013 *for Perodua Alza / Perodua Viva / Perodua Myvi Lagibest 2012 / Chervrolet Silverado 2004 / Chevrolet Vivant model 2007 *for Kia Morning 2008 *for SRT-4 Dodge Neon 2004 *for Dodge Durango 2004; *for Grand Marquis 2004 *for Chevy Trailblazer 2006 *for Chevy Silverado 2005 *for Mustang 2004 *for Rainier 2005 *for Jaguar XF 2011
Package List:
1 x T100 Head Up Display
1 x OBD Cable
1 x Reflective Film
1 x Antiskid Pad
1 x User Manual
Instructions:
1. Automatically adapt to the automobile models with OBD II (Bus Automatic Diagnostic System) interface. Check if it has the automobile diagnostic socket under the steering wheel.
2. Identify the car’s 16-pin diagnostic socket, connecting the OBD II cable to the 16-pin diagnostic socket if it has this socket.
3. Put the non-slip pad onto the instrument pane, then put HUD on the non-slip pad, you can adjust the angle.
4. The reflective film may be affixed to the forward position of HUD and stick to the front windshield, ensuring that the information, such as car speed can be projected to the reflective film.
Additional information
Weight | 0.23 kg |
---|---|
Dimensions | 15 × 10 × 25 cm |
Brand Name | YASOKRO |
Output Frequency | T100 Head Up Display |
Wire or Wireless | wire |
Size Name | 115x66x12mm |
Rated Power | T100 HUD |
Feature 1 | T100 OBD2 OBDii Car Speed Projector |
Feature 2 | T100 Hud Head Up Display Speedo On Glass Film |
Feature 3 | Speed alarm,voltage alarm, |
Feature 4 | Projector on the windshield |
Feature 5 | head up display |
Reviews
There are no reviews yet.